Mac100% 1998 November/MAC100-1998-11.ISO.7z/MAC100-1998-11.ISO/ｵﾝﾗｲﾝｿﾌﾄ定点観測/ﾃﾞﾓ/DesignWorks 4.0.1 PPC Demo.sea/DesignWorks 4.0.1 Demo PowerMac/Schematic.rsrc/DITL.txt

Text File | 1997-07-04 | 76KB | 3,439 lines

DITL_29878.txt
Items: (5 entries)
  0:
    Bounds: x1=327, y1=101, x2=398, y2=122
    Type: 4
    Info: 'Retry'
  1:
    Bounds: x1=72, y1=52, x2=398, y2=86
    Type: 8
    Info: '^0'
  2:
    Bounds: x1=72, y1=101, x2=143, y2=122
    Type: 4
    Info: 'Quit'
  3:
    Bounds: x1=243, y1=101, x2=314, y2=122
    Type: 4
    Info: 'Ignore'
  4:
    Bounds: x1=72, y1=17, x2=398, y2=51
    Type: -120
    Info: 'Memory Error detected by SmartHeap Library.'

DITL_29877.txt
Items: (4 entries)
  0:
    Bounds: x1=47, y1=52, x2=359, y2=78
    Type: 8
    Info: 'Error Code ^0.'
  1:
    Bounds: x1=202, y1=91, x2=273, y2=112
    Type: 4
    Info: 'Quit'
  2:
    Bounds: x1=288, y1=91, x2=359, y2=112
    Type: 4
    Info: 'Ignore'
  3:
    Bounds: x1=47, y1=17, x2=359, y2=51
    Type: -120
    Info: 'Memory Error detected by SmartHeap Library.'

DITL_3602_Update Success Alert.txt
Items: (2 entries)
  0:
    Bounds: x1=270, y1=100, x2=330, y2=120
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=82, y1=3, x2=330, y2=83
    Type: -120
    Info: '^1 devices updated.'

DITL_3601_Update Ext Alert.txt
Items: (3 entries)
  0:
    Bounds: x1=270, y1=100, x2=330, y2=120
    Type: 4
    Info: 'Proceed'
  1:
    Bounds: x1=190, y1=100, x2=250, y2=120
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=82, y1=3, x2=330, y2=83
    Type: -120
    Info: 'Warning:  Some of the devices to be updated are in circuits that are not open for editing.  If you proceed, some pin connections in these circuits may be changed or broken and should be reviewed manually.'

DITL_3600_Update Ext Alert.txt
Items: (3 entries)
  0:
    Bounds: x1=270, y1=100, x2=330, y2=120
    Type: 4
    Info: 'Proceed'
  1:
    Bounds: x1=190, y1=100, x2=250, y2=120
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=82, y1=3, x2=330, y2=83
    Type: -120
    Info: 'Number or placement of pins of new type does not match existing types "^1".  Updating may cause some pins to be disconnected.'

DITL_2814_Attach Ext.txt
Items: (11 entries)
  0:
    Bounds: x1=262, y1=167, x2=322, y2=187
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=262, y1=137, x2=322, y2=157
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=105, y1=167, x2=240, y2=187
    Type: 4
    Info: 'Select Design File...'
  3:
    Bounds: x1=35, y1=167, x2=95, y2=187
    Type: 4
    Info: 'Clear'
  4:
    Bounds: x1=12, y1=120, x2=232, y2=136
    Type: 6
    Info: 'Load new subcircuit'
  5:
    Bounds: x1=12, y1=140, x2=232, y2=156
    Type: 6
    Info: 'Set external reference only'
  6:
    Bounds: x1=3, y1=2, x2=312, y2=51
    Type: -120
    Info: 'Attach an external design file as this device's subcircuit.  WARNING: This also affects all other devices of the same type in this design.'
  7:
    Bounds: x1=8, y1=58, x2=316, y2=74
    Type: 8
    Info: 'External file name: ^0'
  8:
    Bounds: x1=8, y1=74, x2=316, y2=90
    Type: 8
    Info: 'Directory path: ^1'
  9:
    Bounds: x1=8, y1=90, x2=316, y2=106
    Type: 8
    Info: 'Status: ^2'
  10:
    Bounds: x1=4, y1=56, x2=320, y2=108
    Type: 64
    Info: '□,'

DITL_2813_Clear Ext.txt
Items: (5 entries)
  0:
    Bounds: x1=226, y1=141, x2=286, y2=161
    Type: 4
    Info: 'Proceed'
  1:
    Bounds: x1=151, y1=141, x2=211, y2=161
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=12, y1=90, x2=232, y2=106
    Type: 6
    Info: 'All devices in entire design'
  3:
    Bounds: x1=12, y1=110, x2=289, y2=126
    Type: 6
    Info: 'Selected devices in current circuit only'
  4:
    Bounds: x1=3, y1=2, x2=289, y2=82
    Type: -120
    Info: 'Discard subcircuits from all devices with an external file reference.  Devices without an external reference will be left untouched.  WARNING: This cannot be undone!!!'

DITL_2812_Update Ext.txt
Items: (5 entries)
  0:
    Bounds: x1=266, y1=136, x2=326, y2=156
    Type: 4
    Info: 'Proceed'
  1:
    Bounds: x1=191, y1=136, x2=251, y2=156
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=12, y1=80, x2=232, y2=96
    Type: 6
    Info: 'All devices in entire design'
  3:
    Bounds: x1=12, y1=100, x2=289, y2=116
    Type: 6
    Info: 'Selected devices in current circuit only'
  4:
    Bounds: x1=3, y1=2, x2=330, y2=67
    Type: -120
    Info: 'Update device subcircuits using the external file references in attribute fields ExtCctName and ExtCctPath.  Devices without an external reference or that are up to date will be ignored.'

DITL_2810_Place Subcircuit.txt
Items: (4 entries)
  0:
    Bounds: x1=290, y1=225, x2=350, y2=245
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=213, y1=225, x2=268, y2=245
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=5, y1=71, x2=321, y2=213
    Type: 0
    Info: ''
  3:
    Bounds: x1=5, y1=3, x2=353, y2=68
    Type: -120
    Info: 'Select one of the open designs to be placed in the current design as a subcircuit block.  A symbol will be auto-generated and a copy of the select circuit attached.  The selected circuit will not be modified.'

DITL_2800_Update Ext Alert.txt
Items: (2 entries)
  0:
    Bounds: x1=270, y1=100, x2=330, y2=120
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=82, y1=3, x2=330, y2=83
    Type: -120
    Info: 'Update completed.Out of a total of ^0 types scanned:  ^1 were already up to date  ^2 were updated  ^3 were not updated due to errors.'

DITL_2200.txt
Items: (26 entries)
  0:
    Bounds: x1=225, y1=250, x2=285, y2=270
    Type: 4
    Info: 'Done'
  1:
    Bounds: x1=75, y1=250, x2=135, y2=270
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=150, y1=249, x2=210, y2=269
    Type: 4
    Info: 'Apply'
  3:
    Bounds: x1=180, y1=69, x2=278, y2=89
    Type: 4
    Info: 'Border Text...'
  4:
    Bounds: x1=104, y1=2, x2=191, y2=20
    Type: 6
    Info: 'This page'
  5:
    Bounds: x1=198, y1=2, x2=285, y2=20
    Type: 6
    Info: 'All pages'
  6:
    Bounds: x1=6, y1=22, x2=181, y2=38
    Type: 5
    Info: 'Draw background grid'
  7:
    Bounds: x1=6, y1=58, x2=174, y2=74
    Type: 5
    Info: 'Draw default border'
  8:
    Bounds: x1=6, y1=40, x2=188, y2=56
    Type: 5
    Info: 'Print background grid'
  9:
    Bounds: x1=6, y1=76, x2=173, y2=92
    Type: 5
    Info: 'Print default border'
  10:
    Bounds: x1=5, y1=121, x2=132, y2=140
    Type: 6
    Info: 'Use Page Setup'
  11:
    Bounds: x1=5, y1=100, x2=132, y2=116
    Type: 5
    Info: 'Auto-expand'
  12:
    Bounds: x1=5, y1=141, x2=133, y2=159
    Type: 6
    Info: 'Fixed Sheet Size'
  13:
    Bounds: x1=5, y1=162, x2=250, y2=178
    Type: 5
    Info: 'Fit to single sheet when printing'
  14:
    Bounds: x1=6, y1=197, x2=114, y2=217
    Type: 6
    Info: 'Sheet Origin'
  15:
    Bounds: x1=6, y1=216, x2=125, y2=236
    Type: 6
    Info: 'A1 Far Corner'
  16:
    Bounds: x1=126, y1=197, x2=239, y2=217
    Type: 6
    Info: 'B2 Far Corner'
  17:
    Bounds: x1=126, y1=216, x2=257, y2=236
    Type: 6
    Info: 'Sheet Far Corner'
  18:
    Bounds: x1=181, y1=124, x2=198, y2=141
    Type: 6
    Info: ''
  19:
    Bounds: x1=254, y1=124, x2=271, y2=141
    Type: 6
    Info: ''
  20:
    Bounds: x1=247, y1=45, x2=280, y2=60
    Type: 16
    Info: ''
  21:
    Bounds: x1=5, y1=3, x2=95, y2=20
    Type: -120
    Info: 'Sheet Setup'
  22:
    Bounds: x1=3, y1=182, x2=273, y2=199
    Type: -120
    Info: 'Click on the following reference points:'
  23:
    Bounds: x1=191, y1=25, x2=286, y2=42
    Type: -120
    Info: 'Grid divisions'
  24:
    Bounds: x1=231, y1=101, x2=281, y2=154
    Type: -64
    Info: '□ﾀ'
  25:
    Bounds: x1=157, y1=101, x2=207, y2=154
    Type: -64
    Info: '□ﾁ'

DITL_1901_Package Error.txt
Items: (10 entries)
  0:
    Bounds: x1=233, y1=137, x2=333, y2=157
    Type: 4
    Info: 'Continue'
  1:
    Bounds: x1=233, y1=219, x2=333, y2=239
    Type: 4
    Info: 'Abort'
  2:
    Bounds: x1=233, y1=178, x2=333, y2=198
    Type: 4
    Info: 'Ignore Errors'
  3:
    Bounds: x1=11, y1=172, x2=174, y2=205
    Type: -120
    Info: 'Continue processing and ignore errors'
  4:
    Bounds: x1=11, y1=213, x2=186, y2=246
    Type: -120
    Info: 'Stop processing and leave packaging disabled'
  5:
    Bounds: x1=9, y1=167, x2=358, y2=168
    Type: -64
    Info: '□.'
  6:
    Bounds: x1=9, y1=207, x2=358, y2=208
    Type: -64
    Info: '□.'
  7:
    Bounds: x1=81, y1=4, x2=334, y2=120
    Type: -120
    Info: '^0^1^2^3'
  8:
    Bounds: x1=9, y1=127, x2=358, y2=128
    Type: -64
    Info: '□.'
  9:
    Bounds: x1=11, y1=134, x2=172, y2=165
    Type: -120
    Info: 'Continue processing and report errors'

DITL_1900.txt
Items: (4 entries)
  0:
    Bounds: x1=23, y1=80, x2=96, y2=100
    Type: 4
    Info: 'Remove'
  1:
    Bounds: x1=23, y1=112, x2=96, y2=132
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=177, y1=112, x2=250, y2=132
    Type: 4
    Info: 'Leave'
  3:
    Bounds: x1=60, y1=2, x2=261, y2=65
    Type: -120
    Info: 'This block has been assigned package name ^1.  Do you want to remove it before creating an internal circuit?'

DITL_1803_Add Pins.txt
Items: (8 entries)
  0:
    Bounds: x1=155, y1=204, x2=215, y2=224
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=80, y1=204, x2=140, y2=224
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=9, y1=26, x2=218, y2=106
    Type: 16
    Info: ''
  3:
    Bounds: x1=20, y1=132, x2=106, y2=150
    Type: 6
    Info: 'Input'
  4:
    Bounds: x1=20, y1=150, x2=106, y2=168
    Type: 6
    Info: 'Output'
  5:
    Bounds: x1=20, y1=168, x2=131, y2=186
    Type: 6
    Info: 'Bidirectional'
  6:
    Bounds: x1=6, y1=2, x2=208, y2=21
    Type: -120
    Info: 'Pin list (e.g. CLK,EN,D0..7):'
  7:
    Bounds: x1=6, y1=114, x2=81, y2=130
    Type: -120
    Info: 'Pin Type:'

DITL_1802.txt
Items: (6 entries)
  0:
    Bounds: x1=156, y1=150, x2=216, y2=170
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=81, y1=150, x2=141, y2=170
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=17, y1=29, x2=213, y2=106
    Type: 16
    Info: ''
  3:
    Bounds: x1=174, y1=121, x2=211, y2=137
    Type: 16
    Info: ''
  4:
    Bounds: x1=6, y1=2, x2=208, y2=21
    Type: -120
    Info: 'Pin list (e.g. D0..7):'
  5:
    Bounds: x1=12, y1=121, x2=168, y2=137
    Type: -120
    Info: 'Pin spacing (grid units)'

DITL_1801_Add Sigs.txt
Items: (4 entries)
  0:
    Bounds: x1=148, y1=120, x2=208, y2=140
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=73, y1=120, x2=133, y2=140
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=17, y1=29, x2=213, y2=106
    Type: 16
    Info: ''
  3:
    Bounds: x1=6, y1=2, x2=208, y2=21
    Type: -120
    Info: 'Signal list (e.g. D0..7):'

DITL_1800_Bus Pin Info.txt
Items: (14 entries)
  0:
    Bounds: x1=250, y1=230, x2=358, y2=250
    Type: 4
    Info: 'Done'
  1:
    Bounds: x1=250, y1=201, x2=358, y2=221
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=5, y1=20, x2=95, y2=216
    Type: -128
    Info: ''
  3:
    Bounds: x1=125, y1=20, x2=212, y2=216
    Type: -128
    Info: ''
  4:
    Bounds: x1=250, y1=8, x2=358, y2=28
    Type: 4
    Info: 'Join'
  5:
    Bounds: x1=250, y1=32, x2=358, y2=52
    Type: 4
    Info: 'Join Sequential'
  6:
    Bounds: x1=250, y1=63, x2=358, y2=83
    Type: 4
    Info: 'Add Pins...'
  7:
    Bounds: x1=250, y1=87, x2=358, y2=107
    Type: 4
    Info: 'Delete Pins...'
  8:
    Bounds: x1=250, y1=111, x2=358, y2=131
    Type: 4
    Info: 'Pin Info...'
  9:
    Bounds: x1=250, y1=143, x2=358, y2=163
    Type: 4
    Info: 'Add Bus Sigs...'
  10:
    Bounds: x1=250, y1=167, x2=358, y2=187
    Type: 4
    Info: 'Signal Info...'
  11:
    Bounds: x1=13, y1=228, x2=199, y2=244
    Type: 5
    Info: 'Show bus pin annotation'
  12:
    Bounds: x1=5, y1=2, x2=103, y2=19
    Type: -120
    Info: 'Pins in Bus Pin'
  13:
    Bounds: x1=125, y1=1, x2=229, y2=18
    Type: -120
    Info: 'Signals in Bus'

DITL_1311.txt
Items: (6 entries)
  0:
    Bounds: x1=136, y1=94, x2=196, y2=114
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=62, y1=94, x2=122, y2=114
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=33, y1=25, x2=134, y2=45
    Type: 5
    Info: 'Draw Frame'
  3:
    Bounds: x1=33, y1=45, x2=179, y2=65
    Type: 5
    Info: 'Make background'
  4:
    Bounds: x1=33, y1=65, x2=181, y2=85
    Type: 5
    Info: 'Make border item'
  5:
    Bounds: x1=13, y1=3, x2=125, y2=22
    Type: -120
    Info: 'Picture Options'

DITL_1310.txt
Items: (8 entries)
  0:
    Bounds: x1=101, y1=144, x2=161, y2=164
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=18, y1=144, x2=78, y2=164
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=38, y1=109, x2=144, y2=130
    Type: 4
    Info: 'Text Specs...'
  3:
    Bounds: x1=34, y1=20, x2=135, y2=40
    Type: 5
    Info: 'Draw Frame'
  4:
    Bounds: x1=34, y1=40, x2=192, y2=60
    Type: 5
    Info: 'Rule Between Lines'
  5:
    Bounds: x1=34, y1=60, x2=192, y2=80
    Type: 5
    Info: 'Make background'
  6:
    Bounds: x1=34, y1=80, x2=192, y2=100
    Type: 5
    Info: 'Make border item'
  7:
    Bounds: x1=6, y1=2, x2=91, y2=21
    Type: -120
    Info: 'Text Options'

DITL_1308_Part Type Info.txt
Items: (15 entries)
  0:
    Bounds: x1=316, y1=240, x2=376, y2=260
    Type: 4
    Info: 'Go To'
  1:
    Bounds: x1=316, y1=207, x2=376, y2=227
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=188, y1=3, x2=353, y2=19
    Type: -120
    Info: ''
  3:
    Bounds: x1=114, y1=28, x2=221, y2=44
    Type: -120
    Info: ''
  4:
    Bounds: x1=118, y1=45, x2=225, y2=61
    Type: -120
    Info: ''
  5:
    Bounds: x1=93, y1=62, x2=200, y2=78
    Type: -120
    Info: ''
  6:
    Bounds: x1=173, y1=79, x2=240, y2=95
    Type: -120
    Info: ''
  7:
    Bounds: x1=213, y1=96, x2=280, y2=112
    Type: -120
    Info: ''
  8:
    Bounds: x1=8, y1=120, x2=270, y2=264
    Type: -128
    Info: ''
  9:
    Bounds: x1=8, y1=62, x2=90, y2=78
    Type: -120
    Info: 'Checksum:'
  10:
    Bounds: x1=8, y1=3, x2=186, y2=19
    Type: -120
    Info: 'Information on part type:'
  11:
    Bounds: x1=8, y1=28, x2=110, y2=44
    Type: -120
    Info: 'Primitive Type:'
  12:
    Bounds: x1=8, y1=45, x2=114, y2=61
    Type: -120
    Info: 'Subcircuit size:'
  13:
    Bounds: x1=8, y1=79, x2=170, y2=95
    Type: -120
    Info: 'Number of times used:'
  14:
    Bounds: x1=8, y1=96, x2=210, y2=112
    Type: -120
    Info: 'Number of physical instances:'

DITL_1307_PortConn Info.txt
Items: (7 entries)
  0:
    Bounds: x1=287, y1=128, x2=347, y2=148
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=287, y1=97, x2=347, y2=117
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=81, y1=128, x2=155, y2=148
    Type: 4
    Info: 'Next Pin'
  3:
    Bounds: x1=172, y1=128, x2=250, y2=148
    Type: 4
    Info: 'Prev Pin'
  4:
    Bounds: x1=8, y1=4, x2=345, y2=36
    Type: -120
    Info: 'Information on pin ^0 port connector ^1'
  5:
    Bounds: x1=8, y1=47, x2=310, y2=63
    Type: -120
    Info: 'Associated parent pin: ^2'
  6:
    Bounds: x1=8, y1=68, x2=350, y2=84
    Type: -120
    Info: 'Port type: ^3'

DITL_1306_Device Report Info.txt
Items: (6 entries)
  0:
    Bounds: x1=103, y1=108, x2=163, y2=128
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=41, y1=108, x2=91, y2=128
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=16, y1=35, x2=162, y2=51
    Type: 6
    Info: 'Omit from report'
  3:
    Bounds: x1=16, y1=55, x2=161, y2=71
    Type: 6
    Info: 'Report this device'
  4:
    Bounds: x1=16, y1=75, x2=160, y2=91
    Type: 6
    Info: 'Report subcircuit'
  5:
    Bounds: x1=7, y1=8, x2=172, y2=26
    Type: -120
    Info: 'Device Reporting Options'

DITL_1305_Package Info.txt
Items: (8 entries)
  0:
    Bounds: x1=193, y1=132, x2=253, y2=152
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=128, y1=133, x2=178, y2=153
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=16, y1=32, x2=258, y2=48
    Type: 6
    Info: 'Auto-assign package and unit'
  3:
    Bounds: x1=16, y1=50, x2=262, y2=66
    Type: 6
    Info: 'Lock and check package and unit'
  4:
    Bounds: x1=16, y1=68, x2=210, y2=84
    Type: 6
    Info: 'Lock and don't check'
  5:
    Bounds: x1=16, y1=86, x2=223, y2=102
    Type: 6
    Info: 'Ignore package and unit'
  6:
    Bounds: x1=16, y1=104, x2=215, y2=120
    Type: 6
    Info: 'Package subcircuit'
  7:
    Bounds: x1=9, y1=6, x2=133, y2=23
    Type: -120
    Info: 'Packaging Options'

DITL_1304_Bus Info.txt
Items: (7 entries)
  0:
    Bounds: x1=274, y1=240, x2=334, y2=260
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=274, y1=210, x2=334, y2=230
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=134, y1=240, x2=264, y2=260
    Type: 4
    Info: 'Bus Attributes...'
  3:
    Bounds: x1=134, y1=210, x2=264, y2=230
    Type: 4
    Info: 'Signal Info...'
  4:
    Bounds: x1=3, y1=47, x2=316, y2=194
    Type: -128
    Info: ''
  5:
    Bounds: x1=3, y1=3, x2=333, y2=21
    Type: -120
    Info: 'Bus: ^0'
  6:
    Bounds: x1=3, y1=29, x2=93, y2=45
    Type: -120
    Info: 'Bus Signals:'

DITL_1303_Signal Info.txt
Items: (11 entries)
  0:
    Bounds: x1=200, y1=86, x2=281, y2=106
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=131, y1=86, x2=181, y2=106
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=15, y1=86, x2=113, y2=106
    Type: 4
    Info: 'Attributes...'
  3:
    Bounds: x1=200, y1=54, x2=281, y2=74
    Type: 4
    Info: 'Pin List...'
  4:
    Bounds: x1=6, y1=27, x2=144, y2=45
    Type: 5
    Info: 'Omit from report'
  5:
    Bounds: x1=98, y1=5, x2=201, y2=21
    Type: -120
    Info: ''
  6:
    Bounds: x1=86, y1=51, x2=115, y2=66
    Type: 16
    Info: ''
  7:
    Bounds: x1=480, y1=27, x2=560, y2=45
    Type: -120
    Info: ''
  8:
    Bounds: x1=6, y1=5, x2=97, y2=21
    Type: -120
    Info: 'Signal Name:'
  9:
    Bounds: x1=460, y1=27, x2=580, y2=45
    Type: -120
    Info: 'Token Number:'
  10:
    Bounds: x1=7, y1=51, x2=81, y2=67
    Type: -120
    Info: 'Line width'

DITL_1302_Device Info.txt
Items: (19 entries)
  0:
    Bounds: x1=352, y1=162, x2=412, y2=182
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=267, y1=162, x2=327, y2=182
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=267, y1=83, x2=412, y2=103
    Type: 4
    Info: 'Device Attributes...'
  3:
    Bounds: x1=267, y1=107, x2=412, y2=127
    Type: 4
    Info: 'Pin Info...'
  4:
    Bounds: x1=267, y1=59, x2=412, y2=79
    Type: 4
    Info: 'Packaging Options...'
  5:
    Bounds: x1=267, y1=35, x2=412, y2=55
    Type: 4
    Info: 'Report Options...'
  6:
    Bounds: x1=267, y1=131, x2=412, y2=151
    Type: 4
    Info: 'Part Type Info...'
  7:
    Bounds: x1=8, y1=117, x2=170, y2=133
    Type: 5
    Info: 'Show pin numbers'
  8:
    Bounds: x1=8, y1=136, x2=197, y2=152
    Type: 5
    Info: 'Lock opening subcircuit'
  9:
    Bounds: x1=173, y1=3, x2=353, y2=19
    Type: -120
    Info: ''
  10:
    Bounds: x1=88, y1=28, x2=195, y2=44
    Type: -120
    Info: ''
  11:
    Bounds: x1=114, y1=46, x2=221, y2=62
    Type: -120
    Info: ''
  12:
    Bounds: x1=114, y1=64, x2=221, y2=80
    Type: -120
    Info: ''
  13:
    Bounds: x1=118, y1=82, x2=225, y2=98
    Type: -120
    Info: ''
  14:
    Bounds: x1=8, y1=64, x2=114, y2=80
    Type: -120
    Info: 'Token Number:'
  15:
    Bounds: x1=8, y1=3, x2=166, y2=19
    Type: -120
    Info: 'Information on device:'
  16:
    Bounds: x1=8, y1=28, x2=82, y2=44
    Type: -120
    Info: 'Part Type:'
  17:
    Bounds: x1=8, y1=46, x2=110, y2=62
    Type: -120
    Info: 'Primitive Type:'
  18:
    Bounds: x1=8, y1=82, x2=114, y2=98
    Type: -120
    Info: 'Subcircuit size:'

DITL_1301_Pin Info.txt
Items: (13 entries)
  0:
    Bounds: x1=266, y1=126, x2=366, y2=146
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=266, y1=96, x2=366, y2=116
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=266, y1=69, x2=366, y2=89
    Type: 4
    Info: 'Attributes...'
  3:
    Bounds: x1=266, y1=42, x2=366, y2=62
    Type: 4
    Info: 'Bus Pin Info...'
  4:
    Bounds: x1=76, y1=126, x2=150, y2=146
    Type: 4
    Info: 'Next Pin'
  5:
    Bounds: x1=167, y1=126, x2=245, y2=146
    Type: 4
    Info: 'Prev Pin'
  6:
    Bounds: x1=167, y1=29, x2=243, y2=45
    Type: 5
    Info: 'Visible'
  7:
    Bounds: x1=96, y1=29, x2=151, y2=45
    Type: -112
    Info: ''
  8:
    Bounds: x1=8, y1=4, x2=384, y2=22
    Type: -120
    Info: 'Information on pin ^0 device ^1'
  9:
    Bounds: x1=8, y1=75, x2=250, y2=91
    Type: -120
    Info: 'Pin sequence number: ^2'
  10:
    Bounds: x1=8, y1=56, x2=250, y2=72
    Type: -120
    Info: 'Pin type: ^3'
  11:
    Bounds: x1=8, y1=29, x2=91, y2=46
    Type: -120
    Info: 'Pin Number'
  12:
    Bounds: x1=9, y1=94, x2=258, y2=110
    Type: 8
    Info: 'No port association'

DITL_1202.txt
Items: (6 entries)
  0:
    Bounds: x1=346, y1=242, x2=406, y2=262
    Type: 4
    Info: 'Sorry!'
  1:
    Bounds: x1=73, y1=2, x2=413, y2=37
    Type: -120
    Info: 'Warning: The following internal error was detected during the last operation:'
  2:
    Bounds: x1=7, y1=125, x2=389, y2=159
    Type: -120
    Info: 'The severity rating of this error is HIGH.  Data is very likely to be corrupted if you continue editing.'
  3:
    Bounds: x1=73, y1=40, x2=411, y2=113
    Type: -120
    Info: '^0Code: ^1Object name: ^2Object page number: ^3'
  4:
    Bounds: x1=7, y1=168, x2=381, y2=219
    Type: -120
    Info: 'Save your file immediately under a different name, without making any further changes, then quit and restart the program.'
  5:
    Bounds: x1=7, y1=229, x2=315, y2=262
    Type: -120
    Info: 'Call our Technical Support department if you require assistance.'

DITL_1201.txt
Items: (6 entries)
  0:
    Bounds: x1=348, y1=239, x2=408, y2=259
    Type: 4
    Info: 'Sorry!'
  1:
    Bounds: x1=73, y1=2, x2=413, y2=37
    Type: -120
    Info: 'Warning: The following internal error was detected during the last operation:'
  2:
    Bounds: x1=8, y1=120, x2=405, y2=168
    Type: -120
    Info: 'The severity rating of this error is medium.  The result of the operation may be incorrect, or the circuit file may contain inconsistencies.'
  3:
    Bounds: x1=73, y1=40, x2=413, y2=107
    Type: -120
    Info: '^0Code: ^1Object name: ^2Object page number: ^3'
  4:
    Bounds: x1=8, y1=174, x2=408, y2=223
    Type: -120
    Info: 'We recommend saving your file under a different name, without making any further changes, then quitting and restarting the application.'
  5:
    Bounds: x1=7, y1=229, x2=315, y2=262
    Type: -120
    Info: 'Call our Technical Support department if you require assistance.'

DITL_1200.txt
Items: (5 entries)
  0:
    Bounds: x1=336, y1=230, x2=396, y2=250
    Type: 4
    Info: 'Sorry!'
  1:
    Bounds: x1=73, y1=2, x2=413, y2=37
    Type: -120
    Info: 'Warning: The following internal error was detected during the last operation:'
  2:
    Bounds: x1=8, y1=153, x2=339, y2=187
    Type: -120
    Info: 'The severity rating of this error is low, but the result of the operation may be incorrect.'
  3:
    Bounds: x1=73, y1=40, x2=413, y2=142
    Type: -120
    Info: '^0Code: ^1Object name: ^2Object page number: ^3'
  4:
    Bounds: x1=7, y1=195, x2=315, y2=228
    Type: -120
    Info: 'Call our Technical Support department if you require assistance.'

DITL_817_Make Unique.txt
Items: (5 entries)
  0:
    Bounds: x1=282, y1=115, x2=342, y2=135
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=203, y1=115, x2=263, y2=135
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=129, y1=81, x2=339, y2=99
    Type: -112
    Info: ''
  3:
    Bounds: x1=8, y1=81, x2=122, y2=99
    Type: -120
    Info: 'New type name'
  4:
    Bounds: x1=9, y1=5, x2=342, y2=73
    Type: -120
    Info: 'This will make the selected device unique so that it will be disassociated from the original library part and modifications to its internal circuit will not affect others of the same type in this design.'

DITL_816_Ext Cct Probs.txt
Items: (3 entries)
  0:
    Bounds: x1=243, y1=34, x2=354, y2=54
    Type: 4
    Info: 'Locate Circuit'
  1:
    Bounds: x1=82, y1=34, x2=227, y2=54
    Type: 4
    Info: 'Load Without Circuit'
  2:
    Bounds: x1=9, y1=5, x2=399, y2=24
    Type: -120
    Info: 'Can't find external circuit file "^0"'

DITL_815_Dup Type Name.txt
Items: (13 entries)
  0:
    Bounds: x1=284, y1=217, x2=476, y2=237
    Type: 4
    Info: 'Use old'
  1:
    Bounds: x1=416, y1=20, x2=476, y2=40
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=284, y1=99, x2=476, y2=119
    Type: 4
    Info: 'Use new and change name'
  3:
    Bounds: x1=284, y1=166, x2=476, y2=186
    Type: 4
    Info: 'Use new with existing name'
  4:
    Bounds: x1=131, y1=100, x2=267, y2=118
    Type: -112
    Info: ''
  5:
    Bounds: x1=5, y1=100, x2=119, y2=118
    Type: -120
    Info: 'New type name'
  6:
    Bounds: x1=5, y1=5, x2=357, y2=39
    Type: -120
    Info: 'A device type with the same name but different characteristics has already been used in this design.'
  7:
    Bounds: x1=5, y1=194, x2=475, y2=195
    Type: -64
    Info: '□,'
  8:
    Bounds: x1=5, y1=49, x2=475, y2=50
    Type: -64
    Info: '□,'
  9:
    Bounds: x1=5, y1=130, x2=475, y2=131
    Type: -64
    Info: '□,'
  10:
    Bounds: x1=5, y1=136, x2=262, y2=187
    Type: -120
    Info: 'Use the new type and keep the conflicting name.  WARNING: This may create errors in netlists and reports.'
  11:
    Bounds: x1=5, y1=54, x2=275, y2=90
    Type: -120
    Info: 'Use the new type, but rename it to avoid a conflict with the existing one.'
  12:
    Bounds: x1=5, y1=201, x2=253, y2=237
    Type: -120
    Info: 'Use the type definition already existing in the design.'

DITL_813.txt
Items: (4 entries)
  0:
    Bounds: x1=201, y1=158, x2=261, y2=178
    Type: 4
    Info: 'Select'
  1:
    Bounds: x1=201, y1=125, x2=261, y2=145
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=9, y1=22, x2=170, y2=182
    Type: -128
    Info: ''
  3:
    Bounds: x1=9, y1=3, x2=260, y2=16
    Type: -120
    Info: 'Select the part to update from'

DITL_812.txt
Items: (4 entries)
  0:
    Bounds: x1=201, y1=158, x2=261, y2=178
    Type: 4
    Info: 'Select'
  1:
    Bounds: x1=201, y1=125, x2=261, y2=145
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=9, y1=22, x2=170, y2=182
    Type: -128
    Info: ''
  3:
    Bounds: x1=9, y1=3, x2=170, y2=16
    Type: -120
    Info: 'Select a source library'

DITL_811.txt
Items: (9 entries)
  0:
    Bounds: x1=201, y1=165, x2=261, y2=185
    Type: 4
    Info: 'Save'
  1:
    Bounds: x1=201, y1=130, x2=261, y2=150
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=200, y1=100, x2=260, y2=120
    Type: 4
    Info: 'New Lib'
  3:
    Bounds: x1=10, y1=7, x2=176, y2=27
    Type: 5
    Info: 'Internal circuit'
  4:
    Bounds: x1=10, y1=30, x2=260, y2=46
    Type: 6
    Info: 'All attributes in selected instance'
  5:
    Bounds: x1=10, y1=46, x2=274, y2=62
    Type: 6
    Info: 'Attributes in original definition only'
  6:
    Bounds: x1=100, y1=68, x2=260, y2=86
    Type: -112
    Info: ''
  7:
    Bounds: x1=9, y1=94, x2=170, y2=190
    Type: -128
    Info: ''
  8:
    Bounds: x1=9, y1=68, x2=90, y2=86
    Type: -120
    Info: 'Saved name'

DITL_810_Update from Lib.txt
Items: (16 entries)
  0:
    Bounds: x1=339, y1=219, x2=399, y2=239
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=339, y1=189, x2=399, y2=209
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=15, y1=59, x2=160, y2=77
    Type: 8
    Info: ''
  3:
    Bounds: x1=15, y1=105, x2=230, y2=123
    Type: 8
    Info: ''
  4:
    Bounds: x1=15, y1=151, x2=235, y2=169
    Type: 8
    Info: ''
  5:
    Bounds: x1=15, y1=173, x2=310, y2=189
    Type: 5
    Info: 'Recalculate displayed attribute positions'
  6:
    Bounds: x1=15, y1=218, x2=163, y2=236
    Type: 8
    Info: ''
  7:
    Bounds: x1=9, y1=131, x2=316, y2=193
    Type: -64
    Info: '□,'
  8:
    Bounds: x1=9, y1=38, x2=316, y2=81
    Type: -64
    Info: '□,'
  9:
    Bounds: x1=9, y1=85, x2=316, y2=127
    Type: -64
    Info: '□,'
  10:
    Bounds: x1=6, y1=2, x2=310, y2=34
    Type: -120
    Info: 'Update Devices from a New Library Definition.  WARNING: This cannot be undone!'
  11:
    Bounds: x1=12, y1=40, x2=181, y2=57
    Type: 8
    Info: 'Source Library Options'
  12:
    Bounds: x1=12, y1=87, x2=132, y2=103
    Type: -120
    Info: 'Scope Options'
  13:
    Bounds: x1=12, y1=133, x2=179, y2=149
    Type: -120
    Info: 'Attribute Update Options'
  14:
    Bounds: x1=9, y1=197, x2=318, y2=240
    Type: -64
    Info: '□,'
  15:
    Bounds: x1=12, y1=200, x2=206, y2=216
    Type: -120
    Info: 'Internal Circuit Update Options'

DITL_805_Update from Lib Small.txt
Items: (7 entries)
  0:
    Bounds: x1=10, y1=54, x2=120, y2=74
    Type: 4
    Info: 'Update'
  1:
    Bounds: x1=10, y1=166, x2=120, y2=186
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=10, y1=125, x2=120, y2=145
    Type: 4
    Info: 'More Options'
  3:
    Bounds: x1=135, y1=54, x2=413, y2=120
    Type: -120
    Info: 'Update all other instances of this type. Each instance will keep its existing internal circuit (if any) and any attribute values that have been modified.'
  4:
    Bounds: x1=134, y1=125, x2=355, y2=170
    Type: -120
    Info: 'Switch to full Update from Lib options box.'
  5:
    Bounds: x1=135, y1=168, x2=242, y2=185
    Type: -120
    Info: 'Don't update.'
  6:
    Bounds: x1=67, y1=4, x2=413, y2=36
    Type: -120
    Info: 'The symbol for type ^1 has been edited.'

DITL_804.txt
Items: (8 entries)
  0:
    Bounds: x1=9, y1=90, x2=69, y2=110
    Type: 4
    Info: 'Update'
  1:
    Bounds: x1=10, y1=138, x2=70, y2=158
    Type: 4
    Info: 'New'
  2:
    Bounds: x1=9, y1=479, x2=69, y2=499
    Type: -124
    Info: 'Revert'
  3:
    Bounds: x1=8, y1=179, x2=68, y2=199
    Type: 4
    Info: 'Cancel'
  4:
    Bounds: x1=78, y1=83, x2=247, y2=118
    Type: -120
    Info: 'Update all other instances of this type'
  5:
    Bounds: x1=77, y1=129, x2=236, y2=164
    Type: -120
    Info: 'Create new type for this instance'
  6:
    Bounds: x1=79, y1=177, x2=179, y2=204
    Type: -120
    Info: 'Cancel close'
  7:
    Bounds: x1=8, y1=61, x2=108, y2=80
    Type: -120
    Info: 'Close action:'

DITL_803.txt
Items: (3 entries)
  0:
    Bounds: x1=146, y1=117, x2=235, y2=137
    Type: 4
    Info: 'Select New'
  1:
    Bounds: x1=52, y1=117, x2=122, y2=137
    Type: 4
    Info: 'No Model'
  2:
    Bounds: x1=61, y1=5, x2=248, y2=106
    Type: -120
    Info: 'Device type ^1 contains invalid or obsolete behavioural model code.  You can either locate a new MEDA code module or leave the type without a model.'

DITL_802.txt
Items: (5 entries)
  0:
    Bounds: x1=174, y1=73, x2=234, y2=93
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=84, y1=73, x2=144, y2=93
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=125, y1=42, x2=253, y2=60
    Type: -112
    Info: ''
  3:
    Bounds: x1=3, y1=2, x2=253, y2=33
    Type: -120
    Info: ''
  4:
    Bounds: x1=3, y1=42, x2=113, y2=60
    Type: -120
    Info: 'Type name'

DITL_801.txt
Items: (9 entries)
  0:
    Bounds: x1=9, y1=90, x2=69, y2=110
    Type: 4
    Info: 'Update'
  1:
    Bounds: x1=10, y1=138, x2=70, y2=158
    Type: 4
    Info: 'New'
  2:
    Bounds: x1=9, y1=179, x2=69, y2=199
    Type: 4
    Info: 'Revert'
  3:
    Bounds: x1=8, y1=221, x2=68, y2=241
    Type: 4
    Info: 'Cancel'
  4:
    Bounds: x1=78, y1=83, x2=247, y2=118
    Type: -120
    Info: 'Update all other instances of this type'
  5:
    Bounds: x1=77, y1=129, x2=236, y2=164
    Type: -120
    Info: 'Create new type for this instance'
  6:
    Bounds: x1=79, y1=223, x2=179, y2=241
    Type: -120
    Info: 'Cancel close'
  7:
    Bounds: x1=76, y1=173, x2=257, y2=208
    Type: -120
    Info: 'Abandon changes and revert to previous circuit'
  8:
    Bounds: x1=8, y1=61, x2=108, y2=80
    Type: -120
    Info: 'Close action:'

DITL_800.txt
Items: (4 entries)
  0:
    Bounds: x1=199, y1=83, x2=274, y2=103
    Type: 4
    Info: 'Continue'
  1:
    Bounds: x1=86, y1=83, x2=177, y2=103
    Type: 4
    Info: 'Abort Setup'
  2:
    Bounds: x1=11, y1=83, x2=71, y2=103
    Type: 4
    Info: 'Quit'
  3:
    Bounds: x1=59, y1=4, x2=277, y2=72
    Type: -120
    Info: 'Could not open library ^1.  ^0'

DITL_711_AutoCheckpoint.txt
Items: (4 entries)
  0:
    Bounds: x1=198, y1=87, x2=318, y2=107
    Type: 4
    Info: 'Checkpoint Now'
  1:
    Bounds: x1=12, y1=87, x2=182, y2=107
    Type: 4
    Info: 'Skip Until Next Time'
  2:
    Bounds: x1=12, y1=59, x2=182, y2=79
    Type: 4
    Info: 'Disable Auto-Checkpoint'
  3:
    Bounds: x1=65, y1=1, x2=318, y2=55
    Type: -120
    Info: '^1 minutes have elapsed since the design was last checkpointed.  Do you want to checkpoint now?'

DITL_710_AutoBackup.txt
Items: (4 entries)
  0:
    Bounds: x1=178, y1=85, x2=278, y2=105
    Type: 4
    Info: 'Save Now'
  1:
    Bounds: x1=18, y1=85, x2=163, y2=105
    Type: 4
    Info: 'Skip Until Next Time'
  2:
    Bounds: x1=18, y1=57, x2=163, y2=77
    Type: 4
    Info: 'Disable Auto-Save'
  3:
    Bounds: x1=65, y1=1, x2=271, y2=50
    Type: -120
    Info: '^1 minutes have elapsed since the design was last saved.  Do you want to save now?'

DITL_700.txt
Items: (14 entries)
  0:
    Bounds: x1=256, y1=138, x2=336, y2=156
    Type: 4
    Info: 'Open'
  1:
    Bounds: x1=571, y1=0, x2=589, y2=80
    Type: 4
    Info: ''
  2:
    Bounds: x1=256, y1=163, x2=336, y2=181
    Type: 4
    Info: 'Cancel'
  3:
    Bounds: x1=232, y1=39, x2=347, y2=59
    Type: -128
    Info: ''
  4:
    Bounds: x1=256, y1=68, x2=336, y2=86
    Type: 4
    Info: 'Eject'
  5:
    Bounds: x1=256, y1=93, x2=336, y2=111
    Type: 4
    Info: 'Drive'
  6:
    Bounds: x1=9, y1=40, x2=232, y2=186
    Type: 0
    Info: ''
  7:
    Bounds: x1=230, y1=40, x2=247, y2=186
    Type: 0
    Info: ''
  8:
    Bounds: x1=252, y1=124, x2=340, y2=125
    Type: -128
    Info: ''
  9:
    Bounds: x1=532, y1=0, x2=628, y2=101
    Type: -120
    Info: ''
  10:
    Bounds: x1=56, y1=190, x2=284, y2=206
    Type: 5
    Info: 'DesignWorks/Macintosh files'
  11:
    Bounds: x1=56, y1=206, x2=284, y2=222
    Type: 5
    Info: 'Files with names ending in .CCT'
  12:
    Bounds: x1=56, y1=222, x2=180, y2=238
    Type: 5
    Info: 'All other files'
  13:
    Bounds: x1=7, y1=190, x2=50, y2=206
    Type: -120
    Info: 'Show:'

DITL_622.txt
Items: (6 entries)
  0:
    Bounds: x1=274, y1=60, x2=334, y2=80
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=197, y1=60, x2=257, y2=80
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=4, y1=60, x2=80, y2=76
    Type: 5
    Info: 'Visible'
  3:
    Bounds: x1=4, y1=38, x2=220, y2=54
    Type: 5
    Info: 'Apply to all connected signals'
  4:
    Bounds: x1=184, y1=10, x2=337, y2=28
    Type: -112
    Info: ''
  5:
    Bounds: x1=3, y1=10, x2=171, y2=28
    Type: -120
    Info: 'Value for ^0'

DITL_621.txt
Items: (6 entries)
  0:
    Bounds: x1=174, y1=141, x2=234, y2=161
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=84, y1=141, x2=144, y2=161
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=4, y1=143, x2=80, y2=159
    Type: 5
    Info: 'Visible'
  3:
    Bounds: x1=8, y1=200, x2=244, y2=216
    Type: 5
    Info: 'Apply to all connected signals'
  4:
    Bounds: x1=110, y1=11, x2=253, y2=128
    Type: -112
    Info: ''
  5:
    Bounds: x1=3, y1=10, x2=103, y2=50
    Type: -120
    Info: 'Value for ^0'

DITL_620.txt
Items: (6 entries)
  0:
    Bounds: x1=274, y1=40, x2=334, y2=60
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=197, y1=40, x2=257, y2=60
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=7, y1=39, x2=83, y2=55
    Type: 5
    Info: 'Visible'
  3:
    Bounds: x1=8, y1=92, x2=244, y2=108
    Type: 5
    Info: 'Apply to all connected signals'
  4:
    Bounds: x1=184, y1=10, x2=337, y2=28
    Type: -112
    Info: ''
  5:
    Bounds: x1=3, y1=10, x2=170, y2=28
    Type: -120
    Info: 'Value for ^0'

DITL_616_Attribute Value.txt
Items: (17 entries)
  0:
    Bounds: x1=240, y1=10, x2=320, y2=30
    Type: 4
    Info: 'Done'
  1:
    Bounds: x1=240, y1=38, x2=320, y2=58
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=540, y1=66, x2=620, y2=86
    Type: -124
    Info: 'New Field'
  3:
    Bounds: x1=527, y1=200, x2=653, y2=220
    Type: 4
    Info: 'Use Default Value'
  4:
    Bounds: x1=65, y1=274, x2=138, y2=294
    Type: 4
    Info: 'Next'
  5:
    Bounds: x1=203, y1=274, x2=271, y2=294
    Type: 4
    Info: 'Prev'
  6:
    Bounds: x1=228, y1=132, x2=309, y2=148
    Type: 5
    Info: 'Visible'
  7:
    Bounds: x1=228, y1=93, x2=345, y2=109
    Type: 6
    Info: 'Primary fields'
  8:
    Bounds: x1=228, y1=110, x2=328, y2=126
    Type: 6
    Info: 'All fields'
  9:
    Bounds: x1=528, y1=132, x2=645, y2=148
    Type: 6
    Info: 'Always Visible'
  10:
    Bounds: x1=528, y1=149, x2=686, y2=165
    Type: 6
    Info: 'Default Visibility'
  11:
    Bounds: x1=528, y1=166, x2=645, y2=182
    Type: 6
    Info: 'Never Visible'
  12:
    Bounds: x1=9, y1=209, x2=359, y2=263
    Type: 16
    Info: ''
  13:
    Bounds: x1=7, y1=7, x2=196, y2=166
    Type: -128
    Info: ''
  14:
    Bounds: x1=249, y1=186, x2=361, y2=202
    Type: 8
    Info: ''
  15:
    Bounds: x1=114, y1=184, x2=340, y2=203
    Type: -120
    Info: 'unnamed'
  16:
    Bounds: x1=9, y1=184, x2=110, y2=203
    Type: -120
    Info: 'Attributes for:'

DITL_615_Attribute Value.txt
Items: (17 entries)
  0:
    Bounds: x1=240, y1=10, x2=320, y2=30
    Type: 4
    Info: 'Done'
  1:
    Bounds: x1=240, y1=38, x2=320, y2=58
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=540, y1=66, x2=620, y2=86
    Type: -124
    Info: 'New Field'
  3:
    Bounds: x1=528, y1=204, x2=654, y2=224
    Type: 4
    Info: 'Use Default Value'
  4:
    Bounds: x1=65, y1=274, x2=138, y2=294
    Type: 4
    Info: 'Next'
  5:
    Bounds: x1=203, y1=274, x2=271, y2=294
    Type: 4
    Info: 'Prev'
  6:
    Bounds: x1=228, y1=132, x2=309, y2=148
    Type: 5
    Info: 'Visible'
  7:
    Bounds: x1=228, y1=93, x2=345, y2=109
    Type: 6
    Info: 'Primary fields'
  8:
    Bounds: x1=228, y1=110, x2=328, y2=126
    Type: 6
    Info: 'All fields'
  9:
    Bounds: x1=528, y1=132, x2=645, y2=148
    Type: 6
    Info: 'Always Visible'
  10:
    Bounds: x1=528, y1=149, x2=686, y2=165
    Type: 6
    Info: 'Default Visibility'
  11:
    Bounds: x1=528, y1=166, x2=645, y2=182
    Type: 6
    Info: 'Never Visible'
  12:
    Bounds: x1=9, y1=209, x2=359, y2=263
    Type: 16
    Info: ''
  13:
    Bounds: x1=7, y1=7, x2=196, y2=166
    Type: -128
    Info: ''
  14:
    Bounds: x1=249, y1=186, x2=361, y2=202
    Type: 8
    Info: ''
  15:
    Bounds: x1=114, y1=184, x2=340, y2=203
    Type: -120
    Info: 'unnamed'
  16:
    Bounds: x1=9, y1=184, x2=110, y2=203
    Type: -120
    Info: 'Attributes for:'

DITL_614_Attribute Value.txt
Items: (17 entries)
  0:
    Bounds: x1=240, y1=10, x2=320, y2=30
    Type: 4
    Info: 'Done'
  1:
    Bounds: x1=240, y1=38, x2=320, y2=58
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=540, y1=66, x2=620, y2=86
    Type: -124
    Info: 'New Field'
  3:
    Bounds: x1=220, y1=156, x2=346, y2=176
    Type: 4
    Info: 'Use Default Value'
  4:
    Bounds: x1=65, y1=274, x2=138, y2=294
    Type: 4
    Info: 'Next'
  5:
    Bounds: x1=203, y1=274, x2=271, y2=294
    Type: 4
    Info: 'Prev'
  6:
    Bounds: x1=228, y1=132, x2=309, y2=148
    Type: 5
    Info: 'Visible'
  7:
    Bounds: x1=228, y1=93, x2=345, y2=109
    Type: 6
    Info: 'Primary fields'
  8:
    Bounds: x1=228, y1=110, x2=328, y2=126
    Type: 6
    Info: 'All fields'
  9:
    Bounds: x1=528, y1=132, x2=645, y2=148
    Type: 6
    Info: 'Always Visible'
  10:
    Bounds: x1=528, y1=149, x2=686, y2=165
    Type: 6
    Info: 'Default Visibility'
  11:
    Bounds: x1=528, y1=166, x2=645, y2=182
    Type: 6
    Info: 'Never Visible'
  12:
    Bounds: x1=9, y1=209, x2=359, y2=263
    Type: 16
    Info: ''
  13:
    Bounds: x1=7, y1=7, x2=196, y2=166
    Type: -128
    Info: ''
  14:
    Bounds: x1=249, y1=186, x2=361, y2=202
    Type: 8
    Info: ''
  15:
    Bounds: x1=114, y1=184, x2=340, y2=203
    Type: -120
    Info: 'unnamed'
  16:
    Bounds: x1=9, y1=184, x2=110, y2=203
    Type: -120
    Info: 'Attributes for:'

DITL_613_Attribute Value.txt
Items: (17 entries)
  0:
    Bounds: x1=240, y1=10, x2=320, y2=30
    Type: 4
    Info: 'Done'
  1:
    Bounds: x1=240, y1=38, x2=320, y2=58
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=540, y1=66, x2=620, y2=86
    Type: -124
    Info: 'New Field'
  3:
    Bounds: x1=220, y1=156, x2=346, y2=176
    Type: 4
    Info: 'Use Default Value'
  4:
    Bounds: x1=65, y1=274, x2=138, y2=294
    Type: 4
    Info: 'Next'
  5:
    Bounds: x1=203, y1=274, x2=271, y2=294
    Type: 4
    Info: 'Prev'
  6:
    Bounds: x1=228, y1=132, x2=309, y2=148
    Type: 5
    Info: 'Visible'
  7:
    Bounds: x1=228, y1=93, x2=345, y2=109
    Type: 6
    Info: 'Primary fields'
  8:
    Bounds: x1=228, y1=110, x2=328, y2=126
    Type: 6
    Info: 'All fields'
  9:
    Bounds: x1=528, y1=132, x2=645, y2=148
    Type: 6
    Info: 'Always Visible'
  10:
    Bounds: x1=528, y1=149, x2=686, y2=165
    Type: 6
    Info: 'Default Visibility'
  11:
    Bounds: x1=528, y1=166, x2=645, y2=182
    Type: 6
    Info: 'Never Visible'
  12:
    Bounds: x1=9, y1=209, x2=359, y2=263
    Type: 16
    Info: ''
  13:
    Bounds: x1=7, y1=7, x2=196, y2=166
    Type: -128
    Info: ''
  14:
    Bounds: x1=249, y1=186, x2=361, y2=202
    Type: 8
    Info: ''
  15:
    Bounds: x1=114, y1=184, x2=340, y2=203
    Type: -120
    Info: 'unnamed'
  16:
    Bounds: x1=9, y1=184, x2=110, y2=203
    Type: -120
    Info: 'Attributes for:'

DITL_612_Attribute Value.txt
Items: (17 entries)
  0:
    Bounds: x1=240, y1=10, x2=320, y2=30
    Type: 4
    Info: 'Done'
  1:
    Bounds: x1=240, y1=38, x2=320, y2=58
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=240, y1=66, x2=320, y2=86
    Type: 4
    Info: 'New Field'
  3:
    Bounds: x1=520, y1=156, x2=646, y2=176
    Type: 4
    Info: 'Use Default Value'
  4:
    Bounds: x1=65, y1=274, x2=138, y2=294
    Type: 4
    Info: 'Next'
  5:
    Bounds: x1=203, y1=274, x2=271, y2=294
    Type: 4
    Info: 'Prev'
  6:
    Bounds: x1=528, y1=132, x2=609, y2=148
    Type: 5
    Info: 'Visible'
  7:
    Bounds: x1=228, y1=93, x2=345, y2=109
    Type: 6
    Info: 'Primary fields'
  8:
    Bounds: x1=228, y1=110, x2=328, y2=126
    Type: 6
    Info: 'All fields'
  9:
    Bounds: x1=228, y1=132, x2=345, y2=148
    Type: 6
    Info: 'Always Visible'
  10:
    Bounds: x1=228, y1=149, x2=386, y2=165
    Type: 6
    Info: 'Default Visibility'
  11:
    Bounds: x1=228, y1=166, x2=345, y2=182
    Type: 6
    Info: 'Never Visible'
  12:
    Bounds: x1=9, y1=209, x2=359, y2=263
    Type: 16
    Info: ''
  13:
    Bounds: x1=7, y1=7, x2=196, y2=166
    Type: -128
    Info: ''
  14:
    Bounds: x1=249, y1=186, x2=361, y2=202
    Type: 8
    Info: ''
  15:
    Bounds: x1=114, y1=184, x2=340, y2=203
    Type: -120
    Info: 'unnamed'
  16:
    Bounds: x1=9, y1=184, x2=110, y2=203
    Type: -120
    Info: 'Attributes for:'

DITL_611_Attribute Value.txt
Items: (17 entries)
  0:
    Bounds: x1=240, y1=10, x2=320, y2=30
    Type: 4
    Info: 'Done'
  1:
    Bounds: x1=240, y1=38, x2=320, y2=58
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=240, y1=66, x2=320, y2=86
    Type: 4
    Info: 'New Field'
  3:
    Bounds: x1=520, y1=156, x2=646, y2=176
    Type: 4
    Info: 'Use Default Value'
  4:
    Bounds: x1=65, y1=274, x2=138, y2=294
    Type: 4
    Info: 'Next'
  5:
    Bounds: x1=203, y1=274, x2=271, y2=294
    Type: 4
    Info: 'Prev'
  6:
    Bounds: x1=528, y1=132, x2=609, y2=148
    Type: 5
    Info: 'Visible'
  7:
    Bounds: x1=228, y1=93, x2=345, y2=109
    Type: 6
    Info: 'Primary fields'
  8:
    Bounds: x1=228, y1=110, x2=328, y2=126
    Type: 6
    Info: 'All fields'
  9:
    Bounds: x1=228, y1=132, x2=345, y2=148
    Type: 6
    Info: 'Always Visible'
  10:
    Bounds: x1=228, y1=149, x2=386, y2=165
    Type: 6
    Info: 'Default Visibility'
  11:
    Bounds: x1=228, y1=166, x2=345, y2=182
    Type: 6
    Info: 'Never Visible'
  12:
    Bounds: x1=9, y1=209, x2=359, y2=263
    Type: 16
    Info: ''
  13:
    Bounds: x1=7, y1=7, x2=196, y2=166
    Type: -128
    Info: ''
  14:
    Bounds: x1=249, y1=186, x2=361, y2=202
    Type: 8
    Info: ''
  15:
    Bounds: x1=114, y1=184, x2=340, y2=203
    Type: -120
    Info: 'unnamed'
  16:
    Bounds: x1=9, y1=184, x2=110, y2=203
    Type: -120
    Info: 'Attributes for:'

DITL_605.txt
Items: (4 entries)
  0:
    Bounds: x1=123, y1=184, x2=313, y2=204
    Type: 4
    Info: 'Duplicate Definition Only'
  1:
    Bounds: x1=254, y1=151, x2=314, y2=171
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=122, y1=151, x2=239, y2=171
    Type: 4
    Info: 'Duplicate Data'
  3:
    Bounds: x1=57, y1=3, x2=342, y2=139
    Type: -120
    Info: 'Clicking the Duplicate Data button will create a new field definition and duplicate all data stored under this field name throughout the design.  Duplicate Definition Only will create a new field definition similar to the original one but with empty data.'

DITL_604.txt
Items: (3 entries)
  0:
    Bounds: x1=171, y1=94, x2=231, y2=114
    Type: 4
    Info: 'Delete'
  1:
    Bounds: x1=98, y1=94, x2=158, y2=114
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=57, y1=4, x2=230, y2=79
    Type: -120
    Info: 'Warning:  This will delete all data stored under this field name throughout the design!'

DITL_603.txt
Items: (3 entries)
  0:
    Bounds: x1=276, y1=147, x2=336, y2=167
    Type: 4
    Info: 'Merge'
  1:
    Bounds: x1=200, y1=147, x2=260, y2=167
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=67, y1=6, x2=330, y2=135
    Type: -120
    Info: 'That field name is already in use.  You can merge the two fields by clicking the Merge button.  This will move all data stored under field name ^0 to the name ^1 throughout the design.  If ^1 already contains data, the old data will be lost.'

DITL_602_Attribute Definition.txt
Items: (22 entries)
  0:
    Bounds: x1=240, y1=229, x2=300, y2=249
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=170, y1=229, x2=230, y2=249
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=100, y1=229, x2=160, y2=249
    Type: 4
    Info: 'Delete'
  3:
    Bounds: x1=12, y1=229, x2=90, y2=249
    Type: 4
    Info: 'Duplicate'
  4:
    Bounds: x1=140, y1=4, x2=300, y2=20
    Type: 5
    Info: 'Keep with instance'
  5:
    Bounds: x1=140, y1=20, x2=309, y2=36
    Type: 5
    Info: 'Group with Name'
  6:
    Bounds: x1=140, y1=36, x2=300, y2=52
    Type: 5
    Info: 'Show field name'
  7:
    Bounds: x1=140, y1=52, x2=320, y2=68
    Type: 5
    Info: 'Allow carriage returns'
  8:
    Bounds: x1=140, y1=68, x2=320, y2=84
    Type: 5
    Info: 'Rotate text with object'
  9:
    Bounds: x1=140, y1=84, x2=290, y2=100
    Type: 5
    Info: 'Visible by default'
  10:
    Bounds: x1=140, y1=100, x2=290, y2=116
    Type: 5
    Info: 'In primary list'
  11:
    Bounds: x1=140, y1=116, x2=320, y2=132
    Type: 5
    Info: 'Link value list to Part'
  12:
    Bounds: x1=140, y1=156, x2=216, y2=172
    Type: 5
    Info: 'Devices'
  13:
    Bounds: x1=140, y1=172, x2=215, y2=188
    Type: 5
    Info: 'Signals'
  14:
    Bounds: x1=228, y1=156, x2=291, y2=172
    Type: 5
    Info: 'Pins'
  15:
    Bounds: x1=228, y1=172, x2=298, y2=188
    Type: 5
    Info: 'Design'
  16:
    Bounds: x1=6, y1=195, x2=134, y2=211
    Type: 16
    Info: ''
  17:
    Bounds: x1=259, y1=198, x2=310, y2=213
    Type: 16
    Info: ''
  18:
    Bounds: x1=4, y1=3, x2=100, y2=166
    Type: 0
    Info: ''
  19:
    Bounds: x1=4, y1=174, x2=84, y2=190
    Type: -120
    Info: 'Field name'
  20:
    Bounds: x1=139, y1=137, x2=302, y2=155
    Type: -120
    Info: 'Allowed in object types'
  21:
    Bounds: x1=139, y1=197, x2=254, y2=214
    Type: -120
    Info: 'Maximum length'

DITL_601_Attribute Value.txt
Items: (17 entries)
  0:
    Bounds: x1=250, y1=10, x2=310, y2=30
    Type: 4
    Info: 'Done'
  1:
    Bounds: x1=250, y1=38, x2=310, y2=58
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=240, y1=66, x2=320, y2=86
    Type: 4
    Info: 'New Field'
  3:
    Bounds: x1=220, y1=156, x2=346, y2=176
    Type: 4
    Info: 'Use Default Value'
  4:
    Bounds: x1=65, y1=274, x2=138, y2=294
    Type: 4
    Info: 'Next'
  5:
    Bounds: x1=203, y1=274, x2=271, y2=294
    Type: 4
    Info: 'Prev'
  6:
    Bounds: x1=228, y1=132, x2=309, y2=148
    Type: 5
    Info: 'Visible'
  7:
    Bounds: x1=228, y1=93, x2=345, y2=109
    Type: 6
    Info: 'Primary fields'
  8:
    Bounds: x1=228, y1=110, x2=328, y2=126
    Type: 6
    Info: 'All fields'
  9:
    Bounds: x1=228, y1=132, x2=345, y2=148
    Type: 6
    Info: 'Always Visible'
  10:
    Bounds: x1=228, y1=149, x2=386, y2=165
    Type: 6
    Info: 'Default Visibility'
  11:
    Bounds: x1=228, y1=166, x2=345, y2=182
    Type: 6
    Info: 'Never Visible'
  12:
    Bounds: x1=9, y1=209, x2=359, y2=263
    Type: 16
    Info: ''
  13:
    Bounds: x1=7, y1=7, x2=196, y2=166
    Type: -128
    Info: ''
  14:
    Bounds: x1=249, y1=186, x2=361, y2=202
    Type: 8
    Info: ''
  15:
    Bounds: x1=114, y1=184, x2=340, y2=203
    Type: -120
    Info: 'unnamed'
  16:
    Bounds: x1=9, y1=184, x2=110, y2=203
    Type: -120
    Info: 'Attributes for:'

DITL_502.txt
Items: (3 entries)
  0:
    Bounds: x1=235, y1=120, x2=295, y2=140
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=80, y1=120, x2=220, y2=140
    Type: 4
    Info: 'No More Messages'
  2:
    Bounds: x1=79, y1=3, x2=297, y2=111
    Type: -120
    Info: '^0 ^1 ^2 ^3'

DITL_501_Quit Alert.txt
Items: (3 entries)
  0:
    Bounds: x1=240, y1=120, x2=290, y2=140
    Type: 4
    Info: 'Quit'
  1:
    Bounds: x1=120, y1=120, x2=210, y2=140
    Type: 4
    Info: 'Don't Quit'
  2:
    Bounds: x1=79, y1=3, x2=297, y2=111
    Type: -120
    Info: '^0 ^1 ^2 ^3'

DITL_500_Global Error.txt
Items: (3 entries)
  0:
    Bounds: x1=282, y1=169, x2=342, y2=189
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=82, y1=3, x2=348, y2=133
    Type: -120
    Info: 'The last operation was not completed successfully due to an error: ^0'
  2:
    Bounds: x1=82, y1=140, x2=348, y2=155
    Type: -120
    Info: 'Code: ^1^2^3'

DITL_455_Name Options - Signals.txt
Items: (7 entries)
  0:
    Bounds: x1=255, y1=106, x2=315, y2=126
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=184, y1=106, x2=244, y2=126
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=15, y1=27, x2=316, y2=43
    Type: 5
    Info: 'Auto-assign a unique name in Name field'
  3:
    Bounds: x1=15, y1=47, x2=299, y2=63
    Type: 5
    Info: 'Make auto-assigned names visible'
  4:
    Bounds: x1=201, y1=77, x2=262, y2=91
    Type: 16
    Info: ''
  5:
    Bounds: x1=8, y1=3, x2=195, y2=21
    Type: -120
    Info: 'Signal Auto-naming Options'
  6:
    Bounds: x1=15, y1=75, x2=196, y2=91
    Type: -120
    Info: 'Default signal name prefix'

DITL_452_Name Options - Pure.txt
Items: (12 entries)
  0:
    Bounds: x1=365, y1=182, x2=425, y2=202
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=289, y1=182, x2=349, y2=202
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=12, y1=35, x2=75, y2=51
    Type: 6
    Info: 'None'
  3:
    Bounds: x1=12, y1=58, x2=140, y2=74
    Type: 6
    Info: 'Auto Naming On'
  4:
    Bounds: x1=23, y1=93, x2=271, y2=109
    Type: 5
    Info: 'Make auto-assigned names visible'
  5:
    Bounds: x1=161, y1=120, x2=236, y2=136
    Type: -112
    Info: ''
  6:
    Bounds: x1=6, y1=4, x2=304, y2=21
    Type: -120
    Info: 'Auto-naming Options for Pure-mode Designs'
  7:
    Bounds: x1=73, y1=35, x2=321, y2=52
    Type: -120
    Info: '- No automatic assignment to Name.'
  8:
    Bounds: x1=141, y1=58, x2=427, y2=92
    Type: -120
    Info: '- A unique value will be assigned to Name for each symbol.'
  9:
    Bounds: x1=7, y1=29, x2=429, y2=170
    Type: -64
    Info: '□-'
  10:
    Bounds: x1=13, y1=119, x2=155, y2=136
    Type: -120
    Info: 'Default name prefix'
  11:
    Bounds: x1=13, y1=146, x2=423, y2=162
    Type: -120
    Info: 'Note: Auto-packaging is not available in Pure-mode designs.'

DITL_451_Name Options - Physical.txt
Items: (20 entries)
  0:
    Bounds: x1=375, y1=289, x2=435, y2=309
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=299, y1=289, x2=359, y2=309
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=12, y1=48, x2=75, y2=64
    Type: 6
    Info: 'None'
  3:
    Bounds: x1=12, y1=70, x2=140, y2=86
    Type: 6
    Info: 'Auto Naming On'
  4:
    Bounds: x1=13, y1=178, x2=71, y2=194
    Type: 6
    Info: 'None'
  5:
    Bounds: x1=13, y1=200, x2=161, y2=216
    Type: 6
    Info: 'Auto Packaging On'
  6:
    Bounds: x1=12, y1=130, x2=268, y2=147
    Type: 5
    Info: 'Make auto-assigned names visible'
  7:
    Bounds: x1=156, y1=111, x2=231, y2=127
    Type: -112
    Info: ''
  8:
    Bounds: x1=185, y1=257, x2=260, y2=273
    Type: -112
    Info: ''
  9:
    Bounds: x1=8, y1=3, x2=428, y2=20
    Type: -120
    Info: 'Auto-naming and Packaging Options for Physical-mode Designs'
  10:
    Bounds: x1=73, y1=48, x2=322, y2=64
    Type: -120
    Info: '- No automatic assignment to Name.'
  11:
    Bounds: x1=141, y1=70, x2=427, y2=104
    Type: -120
    Info: '- A unique value will be assigned to Name for each symbol.'
  12:
    Bounds: x1=159, y1=200, x2=429, y2=252
    Type: -120
    Info: '- Each symbol will be assigned to a package and the package name and unit will be placed in InstName and Unit.'
  13:
    Bounds: x1=7, y1=25, x2=434, y2=151
    Type: -64
    Info: '□-'
  14:
    Bounds: x1=12, y1=256, x2=181, y2=273
    Type: -120
    Info: 'Default package prefix'
  15:
    Bounds: x1=13, y1=29, x2=185, y2=45
    Type: -120
    Info: 'Auto Name Assignment'
  16:
    Bounds: x1=12, y1=110, x2=149, y2=127
    Type: -120
    Info: 'Default name prefix'
  17:
    Bounds: x1=13, y1=158, x2=145, y2=174
    Type: -120
    Info: 'Auto Packaging'
  18:
    Bounds: x1=71, y1=178, x2=345, y2=194
    Type: -120
    Info: '- No automatic assignment to InstName.'
  19:
    Bounds: x1=7, y1=154, x2=434, y2=282
    Type: -64
    Info: '□-'

DITL_450_Name Options - Flat.txt
Items: (13 entries)
  0:
    Bounds: x1=370, y1=223, x2=430, y2=243
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=294, y1=223, x2=354, y2=243
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=10, y1=39, x2=73, y2=55
    Type: 6
    Info: 'None'
  3:
    Bounds: x1=10, y1=62, x2=138, y2=78
    Type: 6
    Info: 'Auto Naming On'
  4:
    Bounds: x1=10, y1=98, x2=158, y2=114
    Type: 6
    Info: 'Auto Packaging On'
  5:
    Bounds: x1=24, y1=158, x2=282, y2=174
    Type: 5
    Info: 'Make auto-assigned names visible'
  6:
    Bounds: x1=174, y1=189, x2=249, y2=205
    Type: 16
    Info: ''
  7:
    Bounds: x1=12, y1=189, x2=170, y2=205
    Type: -120
    Info: 'Default package prefix'
  8:
    Bounds: x1=6, y1=3, x2=394, y2=21
    Type: -120
    Info: 'Auto-naming and Packaging Options for Flat-mode Designs'
  9:
    Bounds: x1=6, y1=29, x2=430, y2=212
    Type: -64
    Info: '□-'
  10:
    Bounds: x1=71, y1=39, x2=417, y2=56
    Type: -120
    Info: '- No modifications to Name on editing operations.'
  11:
    Bounds: x1=139, y1=62, x2=425, y2=96
    Type: -120
    Info: '- A unique value will be assigned to Name for each symbol.'
  12:
    Bounds: x1=157, y1=98, x2=427, y2=150
    Type: -120
    Info: '- Each symbol will be assigned to a package and the package name and unit will be placed in Name and Unit.'

DITL_436_Mode Change Alert.txt
Items: (4 entries)
  0:
    Bounds: x1=190, y1=100, x2=240, y2=120
    Type: 4
    Info: 'Save'
  1:
    Bounds: x1=104, y1=100, x2=154, y2=120
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=74, y1=70, x2=240, y2=90
    Type: 4
    Info: 'Proceed Without Saving'
  3:
    Bounds: x1=1, y1=1, x2=240, y2=70
    Type: -120
    Info: 'Warning these changes will cause data to be modified or deleted.  Do you want to save before proceeding?'

DITL_433_PhysToPure.txt
Items: (4 entries)
  0:
    Bounds: x1=331, y1=154, x2=391, y2=174
    Type: 4
    Info: 'Proceed'
  1:
    Bounds: x1=260, y1=154, x2=318, y2=174
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=2, y1=2, x2=384, y2=68
    Type: -120
    Info: 'This will switch the design hierarchy mode from Physical to Pure.  WARNING: This may cause instance data to be lost and does not make other changes which may be appropriate, depending on application.'
  3:
    Bounds: x1=2, y1=75, x2=391, y2=142
    Type: -120
    Info: 'Instead of using this command, we recommend using a hierarchy mode change script included in the design kit to perform this operation.  This will ensure that all required settings are changed and design checks are done.'

DITL_432_FlatToPure.txt
Items: (4 entries)
  0:
    Bounds: x1=326, y1=154, x2=386, y2=174
    Type: 4
    Info: 'Proceed'
  1:
    Bounds: x1=255, y1=154, x2=313, y2=174
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=2, y1=2, x2=384, y2=68
    Type: -120
    Info: 'This will switch the design hierarchy mode from Flat to Pure but does not make any other design changes that may be necessary in order for the design to operate correctly in the new mode.'
  3:
    Bounds: x1=2, y1=75, x2=391, y2=142
    Type: -120
    Info: 'Instead of using this command, we recommend using a hierarchy mode change script included in the design kit to perform this operation.  This will ensure that all required settings are changed and design checks are done.'

DITL_431_PhysToFlat.txt
Items: (4 entries)
  0:
    Bounds: x1=338, y1=153, x2=398, y2=173
    Type: 4
    Info: 'Proceed'
  1:
    Bounds: x1=263, y1=153, x2=321, y2=173
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=2, y1=2, x2=384, y2=68
    Type: -120
    Info: 'This will switch the design hierarchy mode from Physical to Flat but does not make any other design changes that may be necessary in order for the design to operate correctly in the new mode.'
  3:
    Bounds: x1=2, y1=75, x2=391, y2=142
    Type: -120
    Info: 'Instead of using this command, we recommend using a hierarchy mode change script included in the design kit to perform this operation.  This will ensure that all required settings are changed and design checks are done.'

DITL_430_FlatToPhys.txt
Items: (4 entries)
  0:
    Bounds: x1=330, y1=163, x2=390, y2=183
    Type: 4
    Info: 'Proceed'
  1:
    Bounds: x1=260, y1=163, x2=318, y2=183
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=2, y1=2, x2=384, y2=68
    Type: -120
    Info: 'This will switch the design hierarchy mode from Flat to Physical but does not make any other design changes that may be necessary in order for the design to operate correctly in the new mode.'
  3:
    Bounds: x1=2, y1=75, x2=391, y2=142
    Type: -120
    Info: 'Instead of using this command, we recommend using a hierarchy mode change script included in the design kit to perform this operation.  This will ensure that all required settings are changed and design checks are done.'

DITL_421_Examples Dialog.txt
Items: (7 entries)
  0:
    Bounds: x1=253, y1=184, x2=353, y2=204
    Type: 4
    Info: 'Open...'
  1:
    Bounds: x1=253, y1=219, x2=353, y2=239
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=9, y1=41, x2=214, y2=203
    Type: -128
    Info: ''
  3:
    Bounds: x1=12, y1=219, x2=213, y2=238
    Type: -120
    Info: 'No action'
  4:
    Bounds: x1=9, y1=211, x2=358, y2=212
    Type: -64
    Info: '□.'
  5:
    Bounds: x1=9, y1=3, x2=207, y2=37
    Type: -120
    Info: 'Open an example design from the installed design kits'
  6:
    Bounds: x1=260, y1=11, x2=356, y2=132
    Type: -64
    Info: '□'

DITL_420_New Design Dialog.txt
Items: (13 entries)
  0:
    Bounds: x1=253, y1=181, x2=353, y2=201
    Type: 4
    Info: 'New'
  1:
    Bounds: x1=253, y1=290, x2=353, y2=310
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=253, y1=213, x2=353, y2=233
    Type: 4
    Info: 'Open...'
  3:
    Bounds: x1=253, y1=250, x2=353, y2=270
    Type: 4
    Info: 'Examples...'
  4:
    Bounds: x1=9, y1=41, x2=214, y2=203
    Type: -128
    Info: ''
  5:
    Bounds: x1=12, y1=215, x2=213, y2=231
    Type: -120
    Info: 'Open an existing design file'
  6:
    Bounds: x1=12, y1=290, x2=213, y2=309
    Type: -120
    Info: 'No action'
  7:
    Bounds: x1=9, y1=236, x2=358, y2=237
    Type: -64
    Info: '□.'
  8:
    Bounds: x1=9, y1=283, x2=358, y2=284
    Type: -64
    Info: '□.'
  9:
    Bounds: x1=9, y1=3, x2=207, y2=37
    Type: -120
    Info: 'Create a new design using the selected template'
  10:
    Bounds: x1=260, y1=11, x2=356, y2=132
    Type: -64
    Info: '□'
  11:
    Bounds: x1=9, y1=209, x2=358, y2=210
    Type: -64
    Info: '□.'
  12:
    Bounds: x1=12, y1=243, x2=225, y2=275
    Type: -120
    Info: 'Select an example design from the installed design kits'

DITL_418_Text Tool.txt
Items: (11 entries)
  0:
    Bounds: x1=238, y1=114, x2=298, y2=134
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=238, y1=86, x2=298, y2=106
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=102, y1=86, x2=123, y2=106
    Type: 6
    Info: ''
  3:
    Bounds: x1=102, y1=108, x2=123, y2=127
    Type: 6
    Info: ''
  4:
    Bounds: x1=164, y1=86, x2=184, y2=106
    Type: 6
    Info: ''
  5:
    Bounds: x1=164, y1=108, x2=184, y2=127
    Type: 6
    Info: ''
  6:
    Bounds: x1=3, y1=3, x2=251, y2=52
    Type: -120
    Info: 'Choose the attribute field that will be set when the text tool is used to name devices and signals.'
  7:
    Bounds: x1=81, y1=65, x2=140, y2=81
    Type: -120
    Info: 'Devices'
  8:
    Bounds: x1=149, y1=65, x2=200, y2=83
    Type: -120
    Info: 'Signals'
  9:
    Bounds: x1=9, y1=88, x2=57, y2=106
    Type: -120
    Info: 'Name'
  10:
    Bounds: x1=9, y1=109, x2=78, y2=127
    Type: -120
    Info: 'InstName'

DITL_415_Circuit Info.txt
Items: (11 entries)
  0:
    Bounds: x1=263, y1=214, x2=323, y2=234
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=263, y1=185, x2=323, y2=205
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=109, y1=215, x2=249, y2=235
    Type: 4
    Info: 'Design Attributes...'
  3:
    Bounds: x1=109, y1=185, x2=249, y2=205
    Type: 4
    Info: 'Clear Change Count'
  4:
    Bounds: x1=7, y1=216, x2=98, y2=232
    Type: 5
    Info: 'Read only'
  5:
    Bounds: x1=174, y1=40, x2=291, y2=58
    Type: 6
    Info: 'Current Page'
  6:
    Bounds: x1=174, y1=60, x2=303, y2=78
    Type: 6
    Info: 'Current Circuit'
  7:
    Bounds: x1=174, y1=80, x2=335, y2=98
    Type: 6
    Info: 'Unrestricted circuits'
  8:
    Bounds: x1=174, y1=100, x2=311, y2=118
    Type: 6
    Info: 'Entire Design'
  9:
    Bounds: x1=7, y1=40, x2=167, y2=179
    Type: -120
    Info: ''
  10:
    Bounds: x1=7, y1=1, x2=329, y2=32
    Type: -120
    Info: ''

DITL_414.txt
Items: (1 entries)
  0:
    Bounds: x1=11, y1=9, x2=369, y2=31
    Type: -120
    Info: 'To cancel, hold down the □ key and type a period (.).'

DITL_413_Orientation.txt
Items: (21 entries)
  0:
    Bounds: x1=243, y1=96, x2=303, y2=116
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=169, y1=97, x2=229, y2=117
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=64, y1=32, x2=80, y2=48
    Type: 6
    Info: ''
  3:
    Bounds: x1=128, y1=32, x2=144, y2=48
    Type: 6
    Info: ''
  4:
    Bounds: x1=192, y1=32, x2=208, y2=48
    Type: 6
    Info: ''
  5:
    Bounds: x1=256, y1=32, x2=272, y2=48
    Type: 6
    Info: ''
  6:
    Bounds: x1=64, y1=64, x2=80, y2=80
    Type: 6
    Info: ''
  7:
    Bounds: x1=128, y1=64, x2=144, y2=80
    Type: 6
    Info: ''
  8:
    Bounds: x1=192, y1=64, x2=208, y2=80
    Type: 6
    Info: ''
  9:
    Bounds: x1=256, y1=64, x2=272, y2=80
    Type: 6
    Info: ''
  10:
    Bounds: x1=86, y1=32, x2=101, y2=47
    Type: -64
    Info: '□ｶ'
  11:
    Bounds: x1=4, y1=3, x2=309, y2=22
    Type: -120
    Info: 'Choose orientation for next device selection'
  12:
    Bounds: x1=151, y1=33, x2=166, y2=48
    Type: 64
    Info: '□ｷ'
  13:
    Bounds: x1=215, y1=34, x2=230, y2=49
    Type: 64
    Info: '□ｸ'
  14:
    Bounds: x1=277, y1=33, x2=292, y2=48
    Type: 64
    Info: '□ｹ'
  15:
    Bounds: x1=86, y1=65, x2=101, y2=80
    Type: 64
    Info: '□ｺ'
  16:
    Bounds: x1=153, y1=64, x2=168, y2=79
    Type: 64
    Info: '□ｻ'
  17:
    Bounds: x1=214, y1=62, x2=229, y2=77
    Type: 64
    Info: '□ｼ'
  18:
    Bounds: x1=276, y1=63, x2=291, y2=78
    Type: 64
    Info: '□ｽ'
  19:
    Bounds: x1=4, y1=30, x2=59, y2=48
    Type: -120
    Info: 'Normal'
  20:
    Bounds: x1=4, y1=64, x2=59, y2=82
    Type: -120
    Info: 'Flipped'

DITL_412.txt
Items: (13 entries)
  0:
    Bounds: x1=165, y1=128, x2=225, y2=148
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=92, y1=128, x2=152, y2=148
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=20, y1=30, x2=36, y2=46
    Type: 6
    Info: ''
  3:
    Bounds: x1=118, y1=30, x2=134, y2=46
    Type: 6
    Info: ''
  4:
    Bounds: x1=217, y1=30, x2=233, y2=46
    Type: 6
    Info: ''
  5:
    Bounds: x1=20, y1=61, x2=36, y2=77
    Type: 6
    Info: ''
  6:
    Bounds: x1=118, y1=61, x2=134, y2=77
    Type: 6
    Info: ''
  7:
    Bounds: x1=217, y1=61, x2=233, y2=77
    Type: 6
    Info: ''
  8:
    Bounds: x1=20, y1=93, x2=36, y2=109
    Type: 6
    Info: ''
  9:
    Bounds: x1=118, y1=93, x2=134, y2=109
    Type: 6
    Info: ''
  10:
    Bounds: x1=217, y1=93, x2=233, y2=109
    Type: 6
    Info: ''
  11:
    Bounds: x1=26, y1=36, x2=227, y2=103
    Type: -64
    Info: '□œ'
  12:
    Bounds: x1=4, y1=3, x2=216, y2=21
    Type: -120
    Info: 'Choose text reference position'

DITL_411_Attach Circuit.txt
Items: (4 entries)
  0:
    Bounds: x1=137, y1=163, x2=197, y2=183
    Type: 4
    Info: 'Attach'
  1:
    Bounds: x1=136, y1=125, x2=196, y2=145
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=10, y1=56, x2=104, y2=191
    Type: -128
    Info: ''
  3:
    Bounds: x1=10, y1=2, x2=158, y2=51
    Type: -120
    Info: 'Select an open circuit to attach'

DITL_410_Print Options.txt
Items: (6 entries)
  0:
    Bounds: x1=180, y1=92, x2=240, y2=112
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=96, y1=92, x2=156, y2=112
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=10, y1=24, x2=200, y2=40
    Type: 6
    Info: 'Print current circuit only'
  3:
    Bounds: x1=10, y1=42, x2=240, y2=58
    Type: 6
    Info: 'Print all unrestricted subcircuits'
  4:
    Bounds: x1=10, y1=60, x2=173, y2=76
    Type: 6
    Info: 'Print entire design'
  5:
    Bounds: x1=5, y1=1, x2=142, y2=20
    Type: -120
    Info: 'Print Range Options'

DITL_409_Pin List Dialog.txt
Items: (4 entries)
  0:
    Bounds: x1=187, y1=163, x2=247, y2=183
    Type: 4
    Info: 'Go To'
  1:
    Bounds: x1=186, y1=125, x2=246, y2=145
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=9, y1=44, x2=153, y2=187
    Type: -128
    Info: ''
  3:
    Bounds: x1=9, y1=6, x2=204, y2=39
    Type: -120
    Info: 'Signal ^0Pin List'

DITL_408.txt
Items: (4 entries)
  0:
    Bounds: x1=87, y1=45, x2=147, y2=65
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=14, y1=45, x2=74, y2=65
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=93, y1=12, x2=134, y2=29
    Type: 16
    Info: ''
  3:
    Bounds: x1=20, y1=11, x2=86, y2=30
    Type: -120
    Info: 'Text size'

DITL_407.txt
Items: (4 entries)
  0:
    Bounds: x1=137, y1=163, x2=197, y2=183
    Type: 4
    Info: 'Select'
  1:
    Bounds: x1=136, y1=125, x2=196, y2=145
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=10, y1=56, x2=104, y2=191
    Type: -128
    Info: ''
  3:
    Bounds: x1=10, y1=2, x2=158, y2=51
    Type: -120
    Info: 'Select a source page'

DITL_406.txt
Items: (6 entries)
  0:
    Bounds: x1=134, y1=105, x2=194, y2=125
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=134, y1=75, x2=194, y2=95
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=21, y1=52, x2=194, y2=68
    Type: 8
    Info: ''
  3:
    Bounds: x1=21, y1=82, x2=90, y2=98
    Type: 8
    Info: ''
  4:
    Bounds: x1=21, y1=112, x2=110, y2=128
    Type: 8
    Info: ''
  5:
    Bounds: x1=20, y1=10, x2=204, y2=43
    Type: 0
    Info: ''

DITL_405.txt
Items: (7 entries)
  0:
    Bounds: x1=95, y1=153, x2=218, y2=173
    Type: 4
    Info: 'Import from File'
  1:
    Bounds: x1=13, y1=153, x2=73, y2=173
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=93, y1=122, x2=223, y2=143
    Type: 4
    Info: 'Import from Page'
  3:
    Bounds: x1=9, y1=28, x2=153, y2=44
    Type: 6
    Info: 'Set this page only'
  4:
    Bounds: x1=9, y1=48, x2=189, y2=64
    Type: 6
    Info: 'Set all pages in design'
  5:
    Bounds: x1=9, y1=84, x2=220, y2=104
    Type: 5
    Info: 'Import printer Page Setup'
  6:
    Bounds: x1=6, y1=2, x2=235, y2=22
    Type: -120
    Info: 'Import sheet layout information:'

DITL_403_Design Prefs.txt
Items: (28 entries)
  0:
    Bounds: x1=381, y1=210, x2=441, y2=230
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=311, y1=210, x2=371, y2=230
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=344, y1=133, x2=424, y2=151
    Type: 4
    Info: 'Pin Text...'
  3:
    Bounds: x1=251, y1=133, x2=331, y2=151
    Type: 4
    Info: 'Attr Text...'
  4:
    Bounds: x1=258, y1=180, x2=409, y2=196
    Type: 5
    Info: 'Rotate pin numbers'
  5:
    Bounds: x1=265, y1=156, x2=401, y2=175
    Type: 4
    Info: 'Text Tool Options...'
  6:
    Bounds: x1=231, y1=12, x2=435, y2=28
    Type: 5
    Info: 'Automatic page references'
  7:
    Bounds: x1=275, y1=32, x2=377, y2=50
    Type: 4
    Info: 'Update Now'
  8:
    Bounds: x1=300, y1=57, x2=371, y2=72
    Type: 16
    Info: ''
  9:
    Bounds: x1=376, y1=83, x2=409, y2=98
    Type: 16
    Info: ''
  10:
    Bounds: x1=23, y1=52, x2=151, y2=68
    Type: 6
    Info: 'Pure hierarchy'
  11:
    Bounds: x1=23, y1=69, x2=183, y2=85
    Type: 6
    Info: 'Physical hierarchy'
  12:
    Bounds: x1=23, y1=86, x2=122, y2=102
    Type: 6
    Info: 'Flat mode'
  13:
    Bounds: x1=16, y1=128, x2=150, y2=146
    Type: 5
    Info: 'Show Crosshairs'
  14:
    Bounds: x1=16, y1=146, x2=179, y2=164
    Type: 5
    Info: 'Show Cursor Position'
  15:
    Bounds: x1=16, y1=164, x2=195, y2=182
    Type: 5
    Info: 'Show Available Memory'
  16:
    Bounds: x1=16, y1=182, x2=206, y2=200
    Type: 5
    Info: 'Show Printed Page Breaks'
  17:
    Bounds: x1=16, y1=200, x2=175, y2=216
    Type: 5
    Info: 'Show Device Frames'
  18:
    Bounds: x1=238, y1=57, x2=292, y2=74
    Type: -120
    Info: 'Format'
  19:
    Bounds: x1=237, y1=81, x2=370, y2=100
    Type: -120
    Info: 'Max. width (items)'
  20:
    Bounds: x1=14, y1=31, x2=86, y2=49
    Type: -120
    Info: 'Hierarchy'
  21:
    Bounds: x1=14, y1=111, x2=125, y2=128
    Type: -120
    Info: 'Other Options'
  22:
    Bounds: x1=8, y1=0, x2=159, y2=18
    Type: -120
    Info: 'Design Preferences'
  23:
    Bounds: x1=227, y1=8, x2=448, y2=106
    Type: -64
    Info: '□-'
  24:
    Bounds: x1=9, y1=28, x2=212, y2=105
    Type: -64
    Info: '□-'
  25:
    Bounds: x1=9, y1=109, x2=212, y2=221
    Type: -64
    Info: '□-'
  26:
    Bounds: x1=232, y1=113, x2=317, y2=129
    Type: -120
    Info: 'Text Options'
  27:
    Bounds: x1=227, y1=110, x2=448, y2=200
    Type: 64
    Info: '□-'

DITL_400.txt
Items: (10 entries)
  0:
    Bounds: x1=237, y1=10, x2=325, y2=30
    Type: 4
    Info: 'Open Page'
  1:
    Bounds: x1=237, y1=152, x2=325, y2=172
    Type: 4
    Info: 'Done'
  2:
    Bounds: x1=237, y1=40, x2=325, y2=60
    Type: 4
    Info: 'New Page'
  3:
    Bounds: x1=237, y1=68, x2=325, y2=88
    Type: 4
    Info: 'Delete Page'
  4:
    Bounds: x1=237, y1=96, x2=325, y2=116
    Type: 4
    Info: 'Promote'
  5:
    Bounds: x1=237, y1=124, x2=325, y2=144
    Type: 4
    Info: 'Demote'
  6:
    Bounds: x1=6, y1=12, x2=199, y2=174
    Type: -128
    Info: ''
  7:
    Bounds: x1=6, y1=209, x2=339, y2=263
    Type: 16
    Info: ''
  8:
    Bounds: x1=97, y1=184, x2=225, y2=202
    Type: -120
    Info: '#'
  9:
    Bounds: x1=5, y1=184, x2=97, y2=202
    Type: -120
    Info: 'Title for page'

DITL_274.txt
Items: (3 entries)
  0:
    Bounds: x1=50, y1=88, x2=110, y2=108
    Type: 4
    Info: 'Quit'
  1:
    Bounds: x1=133, y1=88, x2=193, y2=108
    Type: 4
    Info: 'Return'
  2:
    Bounds: x1=6, y1=4, x2=238, y2=74
    Type: -120
    Info: 'The circuit connection data on the clipboard will be lost when you quit the program.  Only the picture is retained for external use.'

DITL_271.txt
Items: (7 entries)
  0:
    Bounds: x1=297, y1=257, x2=411, y2=277
    Type: 4
    Info: 'Attempt Repair'
  1:
    Bounds: x1=327, y1=225, x2=387, y2=245
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=73, y1=2, x2=413, y2=37
    Type: -120
    Info: 'Warning: The following internal error was detected during the last operation:'
  3:
    Bounds: x1=8, y1=146, x2=339, y2=180
    Type: -120
    Info: 'The circuit data contains a structural error which can be repaired by clicking the button below.'
  4:
    Bounds: x1=73, y1=40, x2=413, y2=142
    Type: -120
    Info: '^0Code: ^1Object name: ^2Object page number: ^3'
  5:
    Bounds: x1=8, y1=184, x2=291, y2=238
    Type: -120
    Info: 'Save your file immediately under a different name, without making any further changes before attempting repair.'
  6:
    Bounds: x1=7, y1=245, x2=289, y2=280
    Type: -120
    Info: 'Call our Technical Support department if you require assistance.'

DITL_254.txt
Items: (4 entries)
  0:
    Bounds: x1=80, y1=48, x2=206, y2=69
    Type: 4
    Info: 'Check and Enable'
  1:
    Bounds: x1=80, y1=79, x2=205, y2=101
    Type: 4
    Info: 'Disable Checking'
  2:
    Bounds: x1=71, y1=4, x2=222, y2=39
    Type: -120
    Info: 'Background structure bug check options:'
  3:
    Bounds: x1=10, y1=79, x2=70, y2=99
    Type: 4
    Info: 'Cancel'

DITL_166.txt
Items: (2 entries)
  0:
    Bounds: x1=9, y1=6, x2=294, y2=44
    Type: -120
    Info: '^0^1^2^3'
  1:
    Bounds: x1=9, y1=47, x2=107, y2=68
    Type: -120
    Info: ''

DITL_163.txt
Items: (6 entries)
  0:
    Bounds: x1=8, y1=57, x2=60, y2=77
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=7, y1=117, x2=67, y2=137
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=8, y1=86, x2=60, y2=106
    Type: 4
    Info: 'OK'
  3:
    Bounds: x1=12, y1=7, x2=140, y2=43
    Type: -120
    Info: 'Select name for combined signal'
  4:
    Bounds: x1=72, y1=57, x2=209, y2=80
    Type: -120
    Info: '^0'
  5:
    Bounds: x1=72, y1=86, x2=207, y2=107
    Type: -120
    Info: '^1'

DITL_157.txt
Items: (7 entries)
  0:
    Bounds: x1=270, y1=160, x2=330, y2=180
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=270, y1=127, x2=330, y2=147
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=8, y1=47, x2=333, y2=98
    Type: -120
    Info: ''
  3:
    Bounds: x1=5, y1=3, x2=333, y2=21
    Type: -120
    Info: 'Bus: ^0'
  4:
    Bounds: x1=6, y1=29, x2=90, y2=45
    Type: -120
    Info: 'Bus Signals:'
  5:
    Bounds: x1=5, y1=99, x2=137, y2=115
    Type: -120
    Info: 'Attributes:'
  6:
    Bounds: x1=8, y1=119, x2=263, y2=188
    Type: 16
    Info: ''

DITL_136_Save.txt
Items: (4 entries)
  0:
    Bounds: x1=23, y1=70, x2=96, y2=90
    Type: 4
    Info: 'Yes'
  1:
    Bounds: x1=23, y1=102, x2=96, y2=122
    Type: 4
    Info: 'No'
  2:
    Bounds: x1=177, y1=102, x2=250, y2=122
    Type: 4
    Info: 'Cancel'
  3:
    Bounds: x1=65, y1=5, x2=261, y2=65
    Type: -120
    Info: 'Save changes to ^0 before closing?'

DITL_135_OK Alert.txt
Items: (2 entries)
  0:
    Bounds: x1=232, y1=119, x2=292, y2=139
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=82, y1=3, x2=296, y2=114
    Type: -120
    Info: '^0^1^2^3'

DITL_134_OK Cancel Alert.txt
Items: (3 entries)
  0:
    Bounds: x1=230, y1=120, x2=290, y2=140
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=140, y1=120, x2=200, y2=140
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=79, y1=3, x2=297, y2=111
    Type: -120
    Info: '^0 ^1 ^2 ^3'

DITL_130.txt
Items: (3 entries)
  0:
    Bounds: x1=234, y1=146, x2=294, y2=166
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=21, y1=53, x2=301, y2=141
    Type: -120
    Info: 'Error - ^0System code ^1^2^3'
  2:
    Bounds: x1=21, y1=145, x2=204, y2=163
    Type: -120
    Info: 'Operation not successful.'